Products
Purpose built pressure vessels to customer specifications

We recognize that many of our customers have requirements for pressure vessels that are unique to their needs.

Such products are varied in their nature, can be fired or unfired and manufactured using specific materials, or operate at modified temperature or pressure.

In some cases it may only require a simple change in configuration or the inclusion of other standard products to meet a customer specification.

In other cases the requirements are more specific, and can only be met through a complete purpose design and manufactured solution.

We pride ourselves on maintaining a workforce in both engineering and manufacture that can fully meet these needs.

Design and Manufacture of Digestion Vessel 1,829 mm x 3,100 mm for a working pressure of 1,000 kPa, volume 10,160 litresDesign and Manufacture Pulsed Column Vessels 1,715 mm x 5,800 mm for working pressure of 350 kPa, volume 14,000 litresManufacture of Refrigeration Liquid Receiver 1,219 mm x 12,000 mm for a working pressure of 1,800 kPa, volume 12,500 litres
Manufacture of Sodium Dioxide Generator for use in foundry 610 mm x 950 mm for a working pressure of 1040 kPa, volume 330 litresManufacture of Anfo vessels for mining industry for 100 or 250 kgs explosive loadsManufacture of after coolers and filter sets used to provide high quality air to Navy maintenance facilities
Design and manufacture of stainless steel buffer tanks used to provide seat dampening in locomotives throughout AustraliaDesign and Manufacture of air / water Surge Vessels 1,829 mm x 4,000 mm for a working pressure of 1,800 kPa, volume 12,120 litresDesign and Manufacture of Air Pressure Pulse Vessels in a range of sizes painted with two pack epoxy to Australian Standards
Design and Manufacture of Air Pressure Vessels for braking systems on rail ore wagons, 1,200 kPa, volume 120 litresDesign and Manufacture of Knock Out Pots for water removal in coal seam gas, 1,750 kPa, volume 320 litresManufacture of Refrigeration Liquid Receiver 1,219 mm x 7,200 mm for a working pressure of 1,700 kPa, volume 8,900 litres
Design and Manufacture of Air Start Vessels for Navy Patrol Boats 762 mm x 2,000 mm for 40 bar, volume 1,025 litresDesign and Manufacture of Thyristor Cooling System for installation into power stationDesign and Manufacture of Refrigeration Surge Vessel 1,676 mm x 4,800 mm for a working pressure of 1,500 kPa, volume 11,825 litres
Design and Manufacture of Steam Accumulation Vessel 1,524 mm x 4,800 mm for a working pressure of 1,500 kPa and 200 Deg C, volume 10,000 litresDesign and Manufacture of Hazardous Gas Recovery Vessel 610 mm x 1,180 mm for a working pressure of 3,300 kPa and 250 Deg C, volume 368 litres
© 2017 Hunt Boilers. All rights reserved.